Boat Model Component Kit

By Admin, 05/07/2026 · 1 min read

Boat Model Component Kit item guide for MakerAccess vending machine projects.

Item guide

Boat Model Component Kit

This article explains how to use Boat Model Component Kit in a MakerAccess project, with the key concepts, build route, and useful reference links.

Back to item dashboard Open 3D printing guide

Boat Model Component Kit photo — Boat Model Component Kit

Purpose

What it is for

Boat Model Component KitBuild your own boat model; contains essential hardware to complement your 3D prints for the project.

Concepts

These kits supply the non-printed hardware for a 3D-printed project. The printed shell or mechanism still needs to be downloaded, sliced, and printed.

The fit depends on print tolerance. Small holes, shafts, and clips may need careful layer height and support settings.

Assembly usually happens after printing, so screws, motors, movements, LEDs, or modules should be test-fitted before final tightening.

Build path

How to use it

Start small, test the fit or circuit, then combine it with the rest of the project.

1

Open the linked project page or prepare the matching model in Bambu Studio.

2

Slice the model for the Bambu P1S with the correct filament, plate, support, and infill settings.

3

Print the parts, clean support material, then dry-fit the kit hardware before fastening.

Project links

Useful links

Open the reference that matches your project route.

Boat Model 010 on MakerWorld
Bambu Lab: print from SD card on P1P/P1S
Bambu Studio: export sliced file to SD card
Bambu Lab: filament guide and material table

Survey and feedback

Help improve MakerAccess

Have an idea for what MakerAccess should stock, improve, or explain next? Share it in the survey. If you bought or used a product and want to comment on the item itself, use the product feedback form.

Do the survey Product feedback form

Boat Model Component Kit